Outback Bag Awning

Outback Awning

• Awning bag comes with rope edge to allow easy installation to sailtrack
• Anodised outrigger with mill finish arms and legs
• Awning size is based on the bag size, the roof is 100mm shorter than this where it meets the bag.
• Awning roof available in 7' projection
• Roof is tapered towards the front IF the optional wall zips have been selected
• Arms and legs fold away into the outrigger and then the bag for travelling
• An optional Roof Brace is available to aid in roof tension and water run off

Awning Size: We measure the awning size as the length of the vinyl bag, the roof is 100mm shorter than the bag overall, so please take this into consideration when ordering your awning.  If you are unsure of what size would be suitable for your van/vehicle, please comment in the box above and we will ring you to discuss the best option.

If you require custom sizing, please comment in the text box above when ordering and specify whether the measurement you have provided is overall bag length required or awning roof length.

These awnings are ideal for 4WD’s and they easily mount to roof racks.  It is okay for the awning to project past the end of the van/vehicle by a small amount provided it is properly installed.

Mounting Brackets: Sailtrack and Angle Up mounting bracket are both available as mounting brackets.

The Outback awning will easily mount into existing sailtrack, or sailtrack can be purchased with the awning.

Angle Up in conjunction with sailtrack is the best option for mounting to a set of racks on a 4WD.  The Outback Awning bag is 200mm deep, so please take this into account when considering mounting options.

Wall Brackets: If the Outback Awning is not going to be mounted using Angle Up, then wall brackets are a good option for bracing the awning arms back against the van/vehicle.  The ends of the arms end in spigot tips which feed through brass eyelets in the awning bag